FloPro Tracker
The FloPro-Tracker is a portable system for carrying out tried and tested wet chemical assays. It makes use of Zone Fluidics to carry out sample preparation steps followed by wet chemical analysis. The FloPro-Tracker can be configured to meet user requirements and can include:
-
Two analyzers
-
A rugged portable 19” rack enclosure
-
An automated self-cleaning filter sampler
-
FloZF device control and data acquisition software
-
An embedded computer coupled to the Analyzers
-
A tablet computer that communicates with the embedded computer using remote access software on an internal Wi-Fi network or over the Internet
-
GPS receivers installed on each FloPro provide the geographical location of the device during sampling and measurement.
-
A removable rack-mounted keyboard, monitor, and mouse
-
A Multi-Sampler that can be configured as an Auto Sampler or Fraction Collector
The FloPro Analyzers are designed to be easily removable to facilitate method development and testing in the laboratory independent of the 19" rack enclosure.
Request for Quote
Specifications
Power Supply Voltage | 100 to 240 VAC, 50/60 Hz |
Power Consumption | 100-240 VAC, 15A (max) |
Sample Size | 20-100 µL |
Heater Temperature Range | Ambient to 120 °C |
Light Source | White LED and W-Xe lamp |
Software | FloZF |
Available Chemistries | PO4, NOx, NH3, SO4, SiO4, Fe, Mn, Al, Zn, Enzymatic assays, H2O2, Cl2 (total), and Cl2 (free) |
Sequence Time | 2-5 minutes |
Precision Mid Calibration Range | 1% |
Linearity of Calibration Curves | r2:0.99 |
Conversion of NO3 to NO2 | >90% |
Weight | - |
Dimensions | 584 x 572 x 520 mm (W x D x H) |
Ambient Operating Temperature | 4 to 60 °C |
Ambient Operating Humidity | 25% to 85% non-condensing |
Storage Temperature | -25 to 65 °C non-condensing and non-icing |
Communications | USB 2.0 |
Accessories
MS | |
SD-ILF | |
SP-0.5 | Sample Probe with replaceable 12mm filter |